stdClass Object
(
[nid] => 131
[vid] => 551
[type] => product
[status] => 1
[created] => 1249364079
[changed] => 1249882120
[comment] => 0
[promote] => 0
[sticky] => 1
[revision_timestamp] => 1249882120
[title] => GSM Intercom & Access Control Unit
[body] =>
WT-9002 IP65 GSM Intercom Access Control System
The GSM Intercom interface converts any existing intercom call point into a full GSM intercom system.
Perfect for secured residential and commercial complexes, with up to 1000 users.
GSM Intercom
WT-9002 IP65 also works with a 2 wire intercom which can be installed outside the premises next to the gate as an intercom. When the call button is pressed, the WT-9002 IP65 will dial out the phone number pre-set and inform the owner about the visitor at the gate.
The owner can answer the call and speak to the visitor and open the gate with one of the buttons of his phone if he wishes to let the guest in.
• Open the gate with your mobile phone
The WT-9002 IP65 can be programmed to open the gate with a "Password". You can use your cellular phone or landline telephone to key in 4-digits pin-code number. WT-9002 IP65 will operate the gate to open if the right pin code is keyed in. The caller can make three attempts before the system hangs-up the call
• Remote programming using your mobile phone
The WT-9002 IP65 can be programmed with a "Master" phone number which will enable to access the unit from anywhere and allow him to maintain the system. The "master number" can phone the WT-9002 IP65 and delete or add any user from the system without the need of accessing the unit on site, making it - Service Free.
• Programmable functions
The unit has a 12v relay with voltage-free outputs that can be used to operate any gate, garage door, alarm and other appliances. One out of two functions (Pulse or Latch) can be chosen to activate the internal relay when the system receives an authorized call.
• Able to program up to 1000 users
The WT-9002 IP65 can be programmed with up to 1000 phone numbers to include as the users (any basic telephone line or cellular phone numbers). When one of these phone numbers call to WT-9002 IP65 unit, the system will recognize the phone number and open the gate if it is an authorized number. The unit allows the end user to add and delete users from the system individually
• Security Lock Status
The end user can dial the WT-9002 IP65 unit and check if the gate is open or closed. WT-9002 IP65 allow the user to close or open the gate form his phone or lock the system to be used by any of the authorized users.
• System Self-Checking Fault Detection and send SMS text message to inform owner
• Backup Battery to prevent power failure
WT9002 User Manual
Price: $599.00
[log] =>
[format] => 3
[uid] => 2
[name] => webmaster
[picture] =>
[data] => a:4:{s:7:"contact";i:1;s:17:"mimemail_textonly";i:0;s:11:"remember_me";b:1;s:14:"tinymce_status";s:4:"true";}
[pparent] => 0
[sku] =>
[price] => 599.00
[ptype] => tangible
[hide_cart_link] => 0
[stock] => 4
[manage_stock] => 1
[availability] => 3
[flexicharge_methods] => Array
(
[regional_shipping] => Array
(
[weight] => 3
)
)
[anon_policy] => 2
[path] => product/gate_automation/accessories/gsm_intercom_access_control_unit
[role_price] => Array
(
[5] => 550.00
[0] => 599.00
)
[nodewords] => Array
(
)
[field_product_image] => Array
(
[0] => Array
(
[fid] => 97
[title] => WT-9002(1).jpg
[alt] => WT-9002(1).jpg
[nid] => 131
[filename] => WT-9002(1).jpg
[filepath] => files/product_images/WT-9002(1).jpg
[filemime] => image/pjpeg
[filesize] => 114273
[view] =>
.jpg)
)
[1] => Array
(
[fid] => 98
[title] => WT-9002.jpg
[alt] => WT-9002.jpg
[nid] => 131
[filename] => WT-9002.jpg
[filepath] => files/product_images/WT-9002.jpg
[filemime] => image/pjpeg
[filesize] => 60320
[view] =>
)
[2] => Array
(
[fid] => 99
[title] => wt-9002_wiring_diagram.jpg
[alt] => wt-9002_wiring_diagram.jpg
[nid] => 131
[filename] => wt-9002_wiring_diagram.jpg
[filepath] => files/product_images/wt-9002_wiring_diagram.jpg
[filemime] => image/pjpeg
[filesize] => 106980
[view] =>
)
)
[field_short_description] => Array
(
[0] => Array
(
[value] => For up to 1000 Users
[view] => For up to 1000 Users
)
)
[taxonomy] => Array
(
[20] => stdClass Object
(
[tid] => 20
[vid] => 2
[name] => Accessories
[description] =>
[weight] => 0
)
[16] => stdClass Object
(
[tid] => 16
[vid] => 2
[name] => Access Control
[description] =>
[weight] => 8
)
)
[readmore] => 1
[content] => Array
(
[field_product_image] => Array
(
[#access] => 1
[#value] =>
[#weight] => -2
[#printed] => 1
)
[field_short_description] => Array
(
[#access] => 1
[#value] =>
[#weight] => -1
[#printed] => 1
)
[body] => Array
(
[#weight] => 0
[#value] =>
WT-9002 IP65 GSM Intercom Access Control System
The GSM Intercom interface converts any existing intercom call point into a full GSM intercom system.
Perfect for secured residential and commercial complexes, with up to 1000 users.
GSM Intercom
WT-9002 IP65 also works with a 2 wire intercom which can be installed outside the premises next to the gate as an intercom. When the call button is pressed, the WT-9002 IP65 will dial out the phone number pre-set and inform the owner about the visitor at the gate.
The owner can answer the call and speak to the visitor and open the gate with one of the buttons of his phone if he wishes to let the guest in.
• Open the gate with your mobile phone
The WT-9002 IP65 can be programmed to open the gate with a "Password". You can use your cellular phone or landline telephone to key in 4-digits pin-code number. WT-9002 IP65 will operate the gate to open if the right pin code is keyed in. The caller can make three attempts before the system hangs-up the call
• Remote programming using your mobile phone
The WT-9002 IP65 can be programmed with a "Master" phone number which will enable to access the unit from anywhere and allow him to maintain the system. The "master number" can phone the WT-9002 IP65 and delete or add any user from the system without the need of accessing the unit on site, making it - Service Free.
• Programmable functions
The unit has a 12v relay with voltage-free outputs that can be used to operate any gate, garage door, alarm and other appliances. One out of two functions (Pulse or Latch) can be chosen to activate the internal relay when the system receives an authorized call.
• Able to program up to 1000 users
The WT-9002 IP65 can be programmed with up to 1000 phone numbers to include as the users (any basic telephone line or cellular phone numbers). When one of these phone numbers call to WT-9002 IP65 unit, the system will recognize the phone number and open the gate if it is an authorized number. The unit allows the end user to add and delete users from the system individually
• Security Lock Status
The end user can dial the WT-9002 IP65 unit and check if the gate is open or closed. WT-9002 IP65 allow the user to close or open the gate form his phone or lock the system to be used by any of the authorized users.
• System Self-Checking Fault Detection and send SMS text message to inform owner
• Backup Battery to prevent power failure
WT9002 User Manual
[#printed] => 1
)
[price] => Array
(
[#weight] => 1
[#value] =>
Price: $599.00
[#printed] => 1
)
[cart] => Array
(
[#weight] => 10
[#value] =>
[#printed] => 1
)
[#children] =>
WT-9002 IP65 GSM Intercom Access Control System
The GSM Intercom interface converts any existing intercom call point into a full GSM intercom system.
Perfect for secured residential and commercial complexes, with up to 1000 users.
GSM Intercom
WT-9002 IP65 also works with a 2 wire intercom which can be installed outside the premises next to the gate as an intercom. When the call button is pressed, the WT-9002 IP65 will dial out the phone number pre-set and inform the owner about the visitor at the gate.
The owner can answer the call and speak to the visitor and open the gate with one of the buttons of his phone if he wishes to let the guest in.
• Open the gate with your mobile phone
The WT-9002 IP65 can be programmed to open the gate with a "Password". You can use your cellular phone or landline telephone to key in 4-digits pin-code number. WT-9002 IP65 will operate the gate to open if the right pin code is keyed in. The caller can make three attempts before the system hangs-up the call
• Remote programming using your mobile phone
The WT-9002 IP65 can be programmed with a "Master" phone number which will enable to access the unit from anywhere and allow him to maintain the system. The "master number" can phone the WT-9002 IP65 and delete or add any user from the system without the need of accessing the unit on site, making it - Service Free.
• Programmable functions
The unit has a 12v relay with voltage-free outputs that can be used to operate any gate, garage door, alarm and other appliances. One out of two functions (Pulse or Latch) can be chosen to activate the internal relay when the system receives an authorized call.
• Able to program up to 1000 users
The WT-9002 IP65 can be programmed with up to 1000 phone numbers to include as the users (any basic telephone line or cellular phone numbers). When one of these phone numbers call to WT-9002 IP65 unit, the system will recognize the phone number and open the gate if it is an authorized number. The unit allows the end user to add and delete users from the system individually
• Security Lock Status
The end user can dial the WT-9002 IP65 unit and check if the gate is open or closed. WT-9002 IP65 allow the user to close or open the gate form his phone or lock the system to be used by any of the authorized users.
• System Self-Checking Fault Detection and send SMS text message to inform owner
• Backup Battery to prevent power failure
WT9002 User Manual
Price: $599.00
[#printed] => 1
)
[links] => Array
(
)
)
.jpg)
